Skip to content

CTC to in-hand salary: how it is worked out, line by line (FY 2026-27)

Finfod Research DeskUpdated15 Nov 2026How we check

In short

  • CTC is the employer’s yearly cost. Gross salary is CTC minus employer PF, gratuity provision and other employer-side items.
  • In-hand is gross salary minus your PF share, professional tax, TDS and, at lower wages, ESI.
  • PF is 12% of wages from each side. The EPF wage ceiling is ₹25,000 a month from 17 September 2026; PF on full basic lowers in-hand but adds to savings.

CTC, or cost to company, is what your employer expects to spend on you in a year. Your in-hand (take-home) pay is smaller. It is your gross salary minus what is deducted from you each month: your own provident fund share, professional tax, income tax deducted at source (TDS) and, at lower wages, ESI. On top of that, a CTC usually holds items you never see in a monthly payslip, such as the employer's PF share, a gratuity provision, insurance and variable pay.

That is why CTC ÷ 12 almost never matches the amount that reaches your bank. This guide walks through the gap line by line for FY 2026-27, with two worked examples. For your own numbers, use the in-hand salary calculator and the income tax calculator.

What is CTC, gross salary and in-hand salary?

CTC is the employer's total yearly cost for you. Gross salary is the part of CTC that is paid to you as salary, before any deduction. In-hand salary is gross salary minus your deductions.

  • CTC = gross salary + employer's PF share + gratuity provision + any insurance premium, variable pay or other employer-side cost the company chooses to count.
  • Gross salary = basic pay + dearness allowance (DA) + house rent allowance (HRA) + special allowance + other allowances paid through the year.
  • In-hand salary = gross salary − your PF share − professional tax − TDS − ESI (if it applies).

None of these words is defined in the Income-tax Act as "CTC". It is a payroll term. The tax law looks at salary actually paid or due to you, and at some employer contributions on their own rules.

What sits inside a typical CTC?

Most offer letters use similar building blocks. The names and the split are the employer's choice, within the law.

Table: What sits inside a typical CTC

Component
Basic pay
Paid monthly?
Yes
Taxable?
Yes, in both regimes
Notes
Drives PF, gratuity and often HRA
Component
Dearness allowance (DA)
Paid monthly?
Yes, where given
Taxable?
Yes
Notes
Counts with basic for PF and gratuity
Component
HRA
Paid monthly?
Yes
Taxable?
Partly exempt in the old regime only
Notes
New Act: Schedule III, table item 11 (was section 10(13A))
Component
Special or flexible allowance
Paid monthly?
Yes
Taxable?
Yes
Notes
Usually the balancing figure
Component
Leave travel allowance (LTA)
Paid monthly?
When claimed
Taxable?
Exempt on conditions in the old regime only
Notes
Paid against actual travel
Component
Employer PF share
Paid monthly?
No, goes to your PF account
Taxable?
Not taxed as salary when paid, within the Act's limits
Notes
Part of CTC, not in-hand
Component
Employer NPS contribution
Paid monthly?
No, goes to your NPS account
Taxable?
Deductible in both regimes, within limits
Notes
New Act section 124 (was 80CCD(2))
Component
Gratuity provision
Paid monthly?
No, paid on exit if you qualify
Taxable?
Exempt within limits when received
Notes
Shown in CTC as a yearly accrual
Component
Bonus or variable pay
Paid monthly?
Usually once or twice a year
Taxable?
Yes, in the month paid
Notes
Depends on targets; not guaranteed
Component
Group insurance premium
Paid monthly?
No
Taxable?
Depends on the policy
Notes
Employer cost, not cash to you

Run this on the calculator

In-hand Salary Calculator

CTC to monthly take-home after PF, gratuity, professional tax and income tax.

Open calculator

How do you go from CTC to in-hand, step by step?

Start from the CTC, take out the employer-side items to reach gross salary, then take out your deductions to reach in-hand.

  1. Remove employer PF. Under the Employees' Provident Funds Scheme, 2026, the usual rate is 12% of wages from the employer and 12% from you. Wages here mean basic pay plus DA.
  2. Remove the gratuity provision. For a covered, monthly-rated employee, gratuity works out to 15/26 of last drawn wages for each counted year. Many employers book that share of basic every year inside CTC. See the gratuity guide.
  3. Remove insurance and any variable pay you will not receive monthly.
  4. What is left is your gross salary. Divide by 12 for the monthly gross, adding any variable pay in the month it is paid.
  5. Take out your own PF share, the same 12% of wages, or the ceiling-based amount (see below).
  6. Take out professional tax, if your state levies it.
  7. Take out TDS. Your employer estimates your tax for the whole year under the regime you choose and spreads it over the months left.
  8. Take out ESI only if your wages are within the ESI coverage limit.

How much PF is cut: the wage ceiling or full basic?

The EPF wage ceiling is the wage level the Centre notifies for statutory PF. From 17 September 2026 it is ₹25,000 a month; before that it was ₹15,000. Statutory contributions use the ceiling when your wage is higher, but the ceiling is not a ban on paying more. So an employer can contribute on the ceiling or on your full basic plus DA, depending on its policy and your agreement.

At the ₹25,000 ceiling, 12% is ₹3,000 a month from you and ₹3,000 from the employer. Of the employer's 12%, 8.33% of wages up to the ceiling goes to the pension fund (₹2,083), and the rest (₹917) goes to your provident fund. If PF is calculated on full basic, both shares grow with basic pay. That lowers in-hand today but builds a larger retirement balance. The EPF calculator shows the long-run effect, and the EPF withdrawal guide covers access.

What did the labour codes change?

The four labour codes have been in force from 21 November 2025, according to the Ministry of Labour. The one that matters most for a salary structure is the Code on Wages, 2019, and its definition of "wages".

"Wages" under the Code means basic pay, DA and retaining allowance. Some items, such as HRA, conveyance, overtime, commission and the employer's PF contribution, are left out. But there is a limit: if the left-out items together are more than half of total remuneration, the amount above half is added back to wages. In simple terms, wages for these purposes must be at least 50% of total pay.

For an employee, this can mean:

  • Higher basic pay in some structures, because allowances can no longer be stretched far above half of the package.
  • Higher PF, where PF is worked out on full wages rather than the ceiling.
  • Higher gratuity provision, because gratuity is based on last drawn wages.
  • Possibly lower in-hand at the same CTC, with more money going to long-term savings.

Your exact effect depends on how your employer has restructured pay. The rules give a floor, not a fixed split.

Professional tax and ESI

Professional tax is a tax on employment levied by some states. Article 276 of the Constitution caps the total professional tax a person can be charged at ₹2,500 a year. Several states charge less, have slabs by income, or do not levy it at all. Your employer deducts it monthly and pays it to the state.

ESI (Employees' State Insurance) covers employees whose wages are within the coverage limit the Centre notifies. Where it applies, the employee's share is 0.75% of wages and the employer's share is 3.25%, according to ESIC. Most mid-level and senior salaries are above the limit, so ESI is not deducted.

Worked examples for FY 2026-27

Notice two things. First, the ₹12 lakh package keeps zero tax even though CTC is ₹12 lakh, because employer PF, gratuity and the standard deduction bring taxable income under the ₹12 lakh rebate line. Second, PF on full basic cuts in-hand by a few thousand a month, but that money is still yours, sitting in your PF account. The slabs guide shows how the slab tax is built.

How is tax on salary worked out under the new Act?

From 1 April 2026 the Income-tax Act, 2025 applies, and the section numbers have changed. The rules for salary are close to the old ones.

Table: Salary items, old and new section numbers

Item
Standard deduction (₹75,000 in the new regime)
Income-tax Act, 1961
Section 16(ia)
Income-tax Act, 2025
Section 19(1), table item 2
Item
HRA exemption (old regime only)
Income-tax Act, 1961
Section 10(13A)
Income-tax Act, 2025
Schedule III, table item 11
Item
Employer NPS contribution
Income-tax Act, 1961
Section 80CCD(2)
Income-tax Act, 2025
Section 124
Item
Rebate up to ₹60,000 (income up to ₹12 lakh)
Income-tax Act, 1961
Section 87A
Income-tax Act, 2025
Section 156
Item
New tax regime
Income-tax Act, 1961
Section 115BAC
Income-tax Act, 2025
Section 202

The section numbers guide has the full map. The new regime is the default. You can choose the old regime if your deductions, such as HRA, section 80C and home-loan interest, make it cheaper. The old vs new regime guide and the deductions guide help you decide, and the HRA guide works through the exemption.

Why is your in-hand lower than CTC ÷ 12?

  • Employer PF is inside CTC but goes to your PF account, not your bank.
  • Gratuity provision is inside CTC but is paid only on exit, and only if you qualify.
  • Variable pay is shown at target and paid later, if at all.
  • Your own PF share, professional tax and TDS come out every month.
  • Insurance premiums and some benefits are employer costs, not cash.
  • TDS can be higher in later months if a raise or bonus pushes up your yearly estimate.

How can you raise in-hand legally?

  • Pick the regime with care. Run both in the income tax calculator and tell your employer your choice early in the year, so TDS matches.
  • Ask about employer NPS. Where offered, the employer's contribution is deductible in both regimes within the section 124 limit. It moves pay into retirement savings, so in-hand may not rise, but tax falls. See the NPS guide.
  • Claim HRA in the old regime if you pay rent and the old regime suits you. Use the HRA exemption calculator.
  • Check the PF basis. If your employer allows it, PF on the ceiling gives more in-hand; PF on full basic gives more savings. It is a trade-off, not a free gain.
  • Voluntary PF (VPF) is optional. It lowers in-hand and is your choice.
  • Submit proofs on time in the old regime, so TDS is not over-deducted.

The short version

CTC is the cost to the employer. Gross salary is CTC minus employer PF, gratuity provision and other employer-side items. In-hand is gross minus your PF, professional tax, TDS and any ESI. The labour codes keep wages at least half of pay, which can lift PF and gratuity and trim in-hand at the same CTC. Check the gratuity calculator for the provision, and always compare offers on what lands in your account.

Questions

Why is my in-hand salary less than CTC divided by 12?

CTC includes items that never reach your bank each month: employer PF, a gratuity provision, insurance and variable pay. Your own PF share, professional tax and TDS are then deducted from gross salary.

Is employer PF part of my salary?

It is part of your CTC, but it is paid into your PF account, not to you each month. Under the EPF Scheme, the usual employer share is 12% of wages, of which 8.33% of wages up to the ceiling goes to the pension fund.

Will the labour codes reduce my take-home pay?

They can, at the same CTC. The Code on Wages requires wages to be at least half of total pay. If your employer raises basic pay to meet that, PF and gratuity can rise and in-hand can fall slightly, while long-term savings grow.

How much professional tax can be deducted?

Article 276 of the Constitution caps professional tax at ₹2,500 a year per person. Each state sets its own slabs within that cap, and some states do not levy it.

Is ESI deducted from every salary?

No. ESI applies only to employees whose wages are within the coverage limit the Centre notifies. Where it applies, the employee pays 0.75% of wages and the employer 3.25%.

Does a ₹12 lakh CTC pay income tax in the new regime?

Often not. In our example, after employer PF, the gratuity provision and the ₹75,000 standard deduction, taxable income falls below ₹12 lakh, so the section 156 rebate makes tax nil. Your result depends on your actual structure.

Sources

Figures checked 15 Nov 2026.

Words used here

  • EPF — The provident fund you and your employer pay into, with its own withdrawal and tax rules.
  • Gratuity — A lump sum at the end of a job. The tax-free line for most people is ₹20 lakh.
  • Standard deduction — ₹75,000 in the new regime and ₹50,000 in the old regime, for salary.
  • HRA — House rent allowance. The old regime exempts the least of three amounts.
  • Labour codes — Four central laws in force from 21 November 2025, including a new gratuity chapter.
  • TDS — Tax deducted by the payer. It is adjusted when you file your return.
  • Employer NPS contribution — Your employer’s NPS payment. Deductible under section 124 in both regimes.
  • New tax regime — Section 202. Lower slabs, a ₹75,000 standard deduction, and few other deductions.

Related calculators

  • In-hand Salary Calculator

    CTC to monthly take-home after PF, gratuity, professional tax and income tax.

  • Income Tax Calculator

    Old and new regime tax for FY 2026-27, with the rebate, surcharge and 4% cess.

  • HRA Exemption Calculator

    The old-regime house rent exemption from actual HRA, rent and the city.

  • EPF Calculator

    Corpus at retirement from basic pay plus DA, with your share, the employer share and interest. The pension share is kept out.

  • Gratuity Calculator

    Gratuity from basic pay and dearness allowance, with the 15/26 formula, the five-year rule and the ₹20 lakh tax-free line.

Related guides